This is a 0-10v DC control cable. You can find these on many legacy systems, Leprecon for one. A, D to A or Digital to Analog conversion may be possible. There are many stand alone boxes out there, but you can also mounting a 5pin in the case and have a board conversion internally. This assumes there is room....
WHY is it in the rack upside down? And possibly worse, between two amplifiers??... I was hopeing to get a dmx workaround board or someting for it ...
... Should be 10 pin Cinch-Jones on the control.
Pins 1-6 - Channels 1-6
Pins 7 - NC
Pin 8 - Common
Pins 9-10 - NC
For the inline connectors, part numbers are
P310CCT for male (plug)
S310CCT for female (socket).
This vendor lists either for 10.50 USD. You might also source them from Allied, Newark, Mouser, and so on; your favorite ETC dealer, or ETC itself at 1-800-688-4116.
I think I'd rather put the effort into an SL620 SmartPack. Even more of a powerhouse, weighs less, and takes up less rack space.... since its a powerhouse at 1200w a channel. ...
I think I'd rather put the effort into an SL620 SmartPack. Even more of a powerhouse, weighs less, and takes up less rack space.
Those KAW type fuses may be a challenge to find these days.........
We use essential cookies to make this site work, and optional cookies to enhance your experience.