DuckJordan
Touring IATSE Member
First I'll explain my setup. I have a dell laptop with the 3.5mm Stereo out cable running to a 2 Channel RCA direct box, out from that using 2 XLR connectors to an old Mackie SR24-4-2 4 bus Mixing Console, both channels getting amazing signal. Then it goes out the mono output through an XLR to 1/4" connector into an old Squier Champ 15 amp.
Out of the speaker comes the local college radio station (this is the interference). The local radio station runs at 94.5 FM. It utterly dissapeared when some static electricity was discharged from me to the console, its back now but at a lower volume. I'm slightly confused as everything except the amplifier/speaker combo is run with balanced signal all the way across.
Not really a big problem as this is just a personal setup for listening to music but still odd none the less can anyone figure this one out. I'm betting its inside the Amp/Speaker box and the only way i can think of shielding it is create a copper mesh box around it.
Out of the speaker comes the local college radio station (this is the interference). The local radio station runs at 94.5 FM. It utterly dissapeared when some static electricity was discharged from me to the console, its back now but at a lower volume. I'm slightly confused as everything except the amplifier/speaker combo is run with balanced signal all the way across.
Not really a big problem as this is just a personal setup for listening to music but still odd none the less can anyone figure this one out. I'm betting its inside the Amp/Speaker box and the only way i can think of shielding it is create a copper mesh box around it.