SoundDECAY23
Member
So I have 2 Rio 3224's and 1 Rio 1608. I recently updated the firmware on my CL5, QL5, and QL1 (the main, sub and Dante firmware). Today I got around to trying to update the Racks and I've literally been fighting this all day. The Firmware itself is updated to 4.10 but the dante firmware won't update via R remote. It's stuck at 3.8 and thats the firmware mismatch problem I'm having. R Remote won't even detect the Current Dante firmware during the analyze step, I get a "Dante Network Setting Failed" and if I try to run the update it just fails. The weirder thing is that I can't get both the Dante Controller and R Remote to detect and interface with the Rio Rack at the same time in the Same IP Network. The R Remote is only working if I do a self Assigned IP and Dante Controller only works if I'm in the range of it's stated IP Address which I'm pretty sure is the issue, because it's Dante controller that operates the Dante drivers on the computer and I need the dante drivers to update the dante firmware of the racks. And I know you HAVE to have Dante Controller to update via the R Remote so I need to get them both working at the same time on the same network line. Has anyone run into this issue before? any help or insight would be much appreciated