Leviton Innovator conventional channels

[Stretch]

I have a 48/96 and am using almost all 96 channels. I've increased to 144 channels in the settings but can't figure how to get to channel 97 or the next page...if such a thing. I have fixtures loaded in "devices" and have plenty of room there but would love to get more conventional channels, if possible. I'm relatively new to this, so be easy on me.

Thanks

 

[CraigV]

I'm not sure how the Leviton Innovator works, but a lot of 48/96 boards I've worked with don't actually have pages for the channels, only the subs. I would try loading the additional channels onto different pages of subs. I always liked to leave Sub Page 1 open for actual subs and start additional channels at page 2.

Use the keypad to bring the channel to full and then record it to sub page 2 sub 1. Could be a decent workaround.

 

[Stretch]

Thanks goatman, I'll give that a try today.

 

[CraigV]

I read up on the specs of the Leviton Innovation 48/96. It listed:

"96 Control Faders
24 Submasters with 8 pages"

It sounds like this is the best bet.

 

[Stretch]

That works just fine. Thanks goatman!