I am having difficulty with a Lightronics TL 2448 not controllong some old NSI dds 9600 Dimmers. I am using the LMX output from the board. When I turn on the dimmers there is no control of the dimmers. If I wait a couple of minutes the dimmers come on to full and are not controllable.
The TL 2448 has both LMX and DMX outputs with a separate power supply.
The dimmers work fine with an old 12 channel 2 scene pre-set board.
Any Ideas?
The TL 2448 has both LMX and DMX outputs with a separate power supply.
The dimmers work fine with an old 12 channel 2 scene pre-set board.
Any Ideas?