Hello all. Trying to color in some MKE1 mics to no success thus far.
My A2 has tried different types of paint, markers, etc, but the slick
teflon coating on the wire seems to flake away everything. My next
step might be to try an emery sponge to roughen the surface, but that
seems time consuming, most likely resulting in an uneven finish, and
perhaps even potential damaging to the copper strands, despite the
kevlar cord. Anyone have any experience with MKE1's in this regard?
Any suggestions would also be appreciated. Thanks.
Sincerely,
Deniz
My A2 has tried different types of paint, markers, etc, but the slick
teflon coating on the wire seems to flake away everything. My next
step might be to try an emery sponge to roughen the surface, but that
seems time consuming, most likely resulting in an uneven finish, and
perhaps even potential damaging to the copper strands, despite the
kevlar cord. Anyone have any experience with MKE1's in this regard?
Any suggestions would also be appreciated. Thanks.
Sincerely,
Deniz