Safety Cables...

My personal pet peeve is when the safety is passed through the yoke on the side of the tilt handle. If you take a c clamp off, make sure the safety stays on the side of the instrument without the tilt handle (source fours mostly here).

Derek, your figure 8 style is interesting, but isn't that similar to just wrapping the pipe twice? It still gets tangled up if you spin the light 180.

Assuming that I am picturing this right, if you spin it 180, the figure 8 should unravel and just be a loop. Continue spinning and you get back to a figure 8. This way you have a 360 degree range of motion. So just make sure you rotate the fixture the correct direction.
 

Users who are viewing this thread

Back