NickVon
Well-Known Member
[EDIT] and second Post Below. I took some doing with some online answer-bases but i think i grasp the layout of the software better.
I think the problem i'm having is how the OS recognizes the Pro40, as I seem to have the same issue with Qlab on the Mac that i have with Multiplay one the PC.
Both programs are only seeing a single device "saffire audio" as an output source, where M-audio FW410 i tested with had options to select 1/2, 3/4, 5/6, Multichan, etc when these programs where opened up
Our theatre recently acquired a Saffire Pro40 by Focusrite. It followed from several threads posted here over the last year or so and some final discussion with our vendors/reps.
I'm looking for some further help from someone who is more familiar with the Saffire Mix Control software as I am having difficulty assigning Multiplay outputs to "software"inputs in the Mix Control, to then Route those inputs to specific outputs to go to our LS9 for specific routing to FX speakers.
Any assistance is helpful and feel to PM is this question is way to involved for a thread.
Currently, I have the Spidif connected to and from the 2TR on the LS9. It is synced and locked at 44.1 wit hte Console being the WC master.
The Spidif out to the TR2 IN on the LS9, is currently the "master Stereo playback" from the PC. I would like to keep it this way.
For a basic start I need to route the Multipay Stereo Pair # 2 to outputs mono3, and mono 4.
I think this is where using the spidif as the basic stereo master and not the "monitor 1/2)" on the Saffire might be screwing me up. Any feedback or comments on a much better way to hook this up; i'm all ears.
NickVon
I think the problem i'm having is how the OS recognizes the Pro40, as I seem to have the same issue with Qlab on the Mac that i have with Multiplay one the PC.
Both programs are only seeing a single device "saffire audio" as an output source, where M-audio FW410 i tested with had options to select 1/2, 3/4, 5/6, Multichan, etc when these programs where opened up
Our theatre recently acquired a Saffire Pro40 by Focusrite. It followed from several threads posted here over the last year or so and some final discussion with our vendors/reps.
I'm looking for some further help from someone who is more familiar with the Saffire Mix Control software as I am having difficulty assigning Multiplay outputs to "software"inputs in the Mix Control, to then Route those inputs to specific outputs to go to our LS9 for specific routing to FX speakers.
Any assistance is helpful and feel to PM is this question is way to involved for a thread.
Currently, I have the Spidif connected to and from the 2TR on the LS9. It is synced and locked at 44.1 wit hte Console being the WC master.
The Spidif out to the TR2 IN on the LS9, is currently the "master Stereo playback" from the PC. I would like to keep it this way.
For a basic start I need to route the Multipay Stereo Pair # 2 to outputs mono3, and mono 4.
I think this is where using the spidif as the basic stereo master and not the "monitor 1/2)" on the Saffire might be screwing me up. Any feedback or comments on a much better way to hook this up; i'm all ears.
NickVon
Last edited: