ehendershot
Member
I have one of our 575's down here on the bench with an odd problem. It will not respond to DMX or strike the lamp when it homes. However, other 575's that are daisy chained through it's dmx I/O will respond according to the commands I send. I've double-checked the address, and set it to factory presets but nothing seems to work.
Strangely enough, if I do commands ( lamp strike, pan/tilt, self test ) from the fixture's menu, it performs as it should.....I'm stumped. Possible dmx input jack failure???
Strangely enough, if I do commands ( lamp strike, pan/tilt, self test ) from the fixture's menu, it performs as it should.....I'm stumped. Possible dmx input jack failure???