I have been looking around for a DMX200 interface with no luck. Can you tell me the part number of the lamp (
bulb) that is used in the VL2C.
I know they stopped making the 600
watt *6100 kelvin
bulb. I was wondering if you know where to find a spare lamp. I have purchased one VL2C for hobby purposes like you did. If i find a lead for any DMX200 interface units I will let you know. Do you have a rack or MiniRack to connect them to a
system. I know the MiniArtisan is a
console and is used with a
Mac to store cues. What does the ADAM DO?
I am Chris Cotter and if you look I have been posting many wanted posts to try and find a DMX200 interface for several months now. If you have any info, diagrams, PDF files I would be most thankful if you could give me copies. If I find a source of any of the old items we are looking for i will
relay them to you as well. I have been reverse engineering the VL2C and have found out a few things. The light seems to have a built in
ballast and has aan automatic
line voltage selection but normally recieves 220VAC applied to its multi cunductor
connector.
The other 4 wires are transmit and recieve pairs. As the light uses 2 way com to operate. The light recieves its
operating system from the
console or DMX200 upon bootup of the
system. There are 2 test eproms stored on one of the internal boards that can be moved to active sockets to test the light without a controller. The Thumbwheel would select the type of test depending on the number dialed in. Normally the
thumbwheel switches are used to set the
address of the light. I have a service
manual and a Quick guide for the VL2C. I also have the PDF file on the DMX200 interface. If you need any of the PDF files let me know. Can you tell me what racks you have. If i can not find a DMX200
unit I would be willing to sell my VL2C. My email is
[email protected] feel free to write me. Thanks - Chris Cotter