So to give a little demonstration of what happens when the correct cooldown process is used versus when the projector is unplugged:
This is a normal cooldown (lamp is turned off, fans run)
This is when power is cut (no fans running)
Lamp is generally going to be the most affected (especially if the projector is moved right after being unplugged), followed by components near the lamp.
This is a normal cooldown (lamp is turned off, fans run)
This is when power is cut (no fans running)
Lamp is generally going to be the most affected (especially if the projector is moved right after being unplugged), followed by components near the lamp.