Tom, I believe that is actually the Coemar Reflection LEDko which we discussed here: http://www.controlbooth.com/forums/...039-coemars-new-release-reflection-ledko.html .
Press release: LEDSource: LED SOURCE® CONTINUES TO GROW PARTNERSHIP WITH COEMAR
Nope!! Derek, I saw that one too. Very impressive and a lot further along the deliverable product.
The one at Gear Source, (the folks that make the megaclamp and all of those geat rigging fixtures) has a heat sink that looks like it came from "Starwars" or some sort of nuclear reactor. A lighting instrument is certainly something you would not expect from a machine shop that builds some of the best rigging materials. I had a long talk with the owner about the design and the technical aspects of the project. When I questioned why a lighting instrument from his company, he pointed out to me that he has an electrical engineering degree, that he has never really used to his satisfaction. He also mentioned that he was delayed a good deal in the development, because he had employed some consultants. He basically dismissed their advice after the instrument didn't work. So he decided to do it on his own.
I don't know that it will be the answer or do a better job than the other efforts for LED ellipsoidals, but I sure like his attitude and drive, and for what I saw so far, I like his product.
Tom Johnson