Another easy way to do this is to directly select the
DMX address using the [Address|Patch] key. You can then modify the
level directly (i.e. [Address|Patch] 2 @ FL. Once the
Address is selected, you can also
roll the
level up or down using the
level wheel, and move your selection up or down using the [Next] and [Last] keys.) The
DMX profile in the document posted above looks like it's just
strobe from slow to fast, but I've found that the manuals for generic lights sometimes are incorrect. I'm guessing that either your
fixture or the
fixture you're using the
profile for may have some macros built into the
strobe channel, so 1-35% is
strobe slow to fast, and 36-100% may be different pulses or something.
Once you determine how the
strobe channel for your
fixture works, you can either find a more accurate
profile built into the
console, or modify the
profile you're currently using. There's definitely a learning curve to building profiles, but once you've figured out how the
profile builder works, it's a useful skill to have.