Walnut
Member
Hi All,
I am having an odd problem with my Leprecon. My space uses 2 ULD 360 Leprecons to pump my dimmer count up to 42. These have been here since before i began this job 4 years ago and I am not sure when they were actually manufactured. the leprecon in question was purchased about 6 years ago and serviced about 3 years ago.
I have 1 fresnel plugged into one of the 3 channel circuits along with one other practical (less than 40 watts). The other 3 channel circuit is filled with practicals (approximately 600 watts). The issue is that the fresenel is not dimming linearly. It doesn't start ghosting until the console sets it at around 18 and after that it dims the rest of the way to Full correctly. I have tested other lights in that circuit and in the other set of circuits and they do the same thing. The leprecon is set to linear dimming (the second thing I checked after the instrument itself).
I know it isn't a wattage issue because the issue persists no matter how many things i have on.
My worry is that i will need to replace the leprecon and I was wondering if anyone had any experience or ideas that might fix this problem
I am having an odd problem with my Leprecon. My space uses 2 ULD 360 Leprecons to pump my dimmer count up to 42. These have been here since before i began this job 4 years ago and I am not sure when they were actually manufactured. the leprecon in question was purchased about 6 years ago and serviced about 3 years ago.
I have 1 fresnel plugged into one of the 3 channel circuits along with one other practical (less than 40 watts). The other 3 channel circuit is filled with practicals (approximately 600 watts). The issue is that the fresenel is not dimming linearly. It doesn't start ghosting until the console sets it at around 18 and after that it dims the rest of the way to Full correctly. I have tested other lights in that circuit and in the other set of circuits and they do the same thing. The leprecon is set to linear dimming (the second thing I checked after the instrument itself).
I know it isn't a wattage issue because the issue persists no matter how many things i have on.
My worry is that i will need to replace the leprecon and I was wondering if anyone had any experience or ideas that might fix this problem