ScaredOfHeightsLD
Active Member
Hello everyone,
I just got back from my hang this morning and we are trying out the S4 70 degree barrels, which on the whole I am very impressed with. However one fixture seems to be continually burning through the gel within seconds of turning the fixture on.
A little background: The fixture is a 70 degree S4 lamped at 750w with a Rosco 74 Gel in it (4% Transmission). We have an identical fixture with the same gel in it (it has been perforated) which has not been burning.
What we have tried: Lamping it down to 575w, perfing the gel, running the barrel in and out.
Has anyone else ran into this problem or have any recommendations. I do have a light in the rig with a R32 gel that could be swapped if you think it is the lens tube. We also have two weeks to opening so I could pick up another one from the rental shop.
Thanks in advance for you help. Hope all is well
-Mike Berger
I just got back from my hang this morning and we are trying out the S4 70 degree barrels, which on the whole I am very impressed with. However one fixture seems to be continually burning through the gel within seconds of turning the fixture on.
A little background: The fixture is a 70 degree S4 lamped at 750w with a Rosco 74 Gel in it (4% Transmission). We have an identical fixture with the same gel in it (it has been perforated) which has not been burning.
What we have tried: Lamping it down to 575w, perfing the gel, running the barrel in and out.
Has anyone else ran into this problem or have any recommendations. I do have a light in the rig with a R32 gel that could be swapped if you think it is the lens tube. We also have two weeks to opening so I could pick up another one from the rental shop.
Thanks in advance for you help. Hope all is well
-Mike Berger