Recent content by Will Elphingstone

Thank You! Can you email me an Eos and a Slab file so I can make sure everything is what it is supposed to be? In Qlab do you select a Qlab, OSC, or USP Message for the cue? Is "Cue 1 9 #" exactly what goes in? Trying to make sure I have everything 100% correct. Thanks!

Hello! I know I can get Qlab to trigger Nomad on the same computer via OSC but am having trouble getting the setting right so that it will work. Has anyone done this and if so what settings did you use. EOS 2.4 and Qlab 4

Hello All, I am designing GREASE on a strand NEO, and today I had an issue. This just started today. At some point during the cue list, something is happening to a set of 7 lights (STRAND PLFRESNEL MK11) on the same electric. They all stay on a certain color and intensity and will not respond to...

I am aware that it will destroy them, but if its for a short period of time, and a last resort...

I have no issue loading one to 100% if its an ETC or other well known brand, built to support a full load for more than a few minutes, and is in good condition. If the dimmer does not meet the previously listed items or has another issues, I will figure out an alternate solution. I begin having...

All- I played around with some settings and got it to work. Thanks for the advice!

I second

I am trying to get a color chase from the center out using 8 SL660s lighting a cyc Will only need 3 colors . Someone has suggested 1. Pixel Mapping 2. Absolute Effect using color palettes. What is the best way, or is there a better way? Currently, I have an absolute effect using color palettes...

So would it be best if I just ran nomad on one computer and capture on the other?

Agreed, Terminate all DMX runs. Self-terminating or not, do it, so that there is no doubt. Then make sure that the main power supply checks out and that there are no issues with it. Also make sure that you are not pulling more power per dimmer than the dimmer can handle. I doubt that that is the...

I am trying to program a shoot ETC Nomad, and would like to have Nomad work with a visualizer. I got the student version of capture. What do I need to do to get the two programs to talk to each other and work, and if they will not work, then was is the best way? I have Nomad sending sACN but am...

for the setup, each clamp will be holding no more than a pound, maybe two.

Hello all, If I have 3/32 inch wire rope, and 1/16th wire rope clamps. Will these work or will they need to be the exact same size. I am a lighting designer, and don't do rigging that often, and wanted to ask. Thanks!

Fire Alarm- house lights on all other lights off, lamp off arcs. Shutdown everything and unplug., De-ass the building Power Outage- Unplug everything incase of a power surge when power returns. Tornado- Power off and unplug Fall/Injury onstage(No major injuries thank god) Record a marco to go to...

Make sure the DMX cable is actually DMX and not XLR (if you are using 3 pin) And make sure to terminate all DMX runs