I have a Leviton D4DMX with 3-pin connectors and no matter what I try, it is unresponsive to DMX. Also, sometimes the LED display leaves off some of the segments.
I've verified that I'm using the DMX input with actual DMX cables. I tried it on two different working DMX sources with no luck. I checked the cables and they appear to be correct. The dimmer powers on and the chases and manual controls work. All channels appear to be normal. The DMX input and the corresponding LED, however, are not doing anything. I have no way to test the Microplex input. I took the cover off and nothing appears out of the ordinary.
Is this repairable? I found mention in another thread that the DMX chip could be bad? Is that possible here? Does this sound like something that could be repaired easily? Other thoughts?
Thanks!
I've verified that I'm using the DMX input with actual DMX cables. I tried it on two different working DMX sources with no luck. I checked the cables and they appear to be correct. The dimmer powers on and the chases and manual controls work. All channels appear to be normal. The DMX input and the corresponding LED, however, are not doing anything. I have no way to test the Microplex input. I took the cover off and nothing appears out of the ordinary.
Is this repairable? I found mention in another thread that the DMX chip could be bad? Is that possible here? Does this sound like something that could be repaired easily? Other thoughts?
Thanks!