I have 24 Apollo color scrollers, currently using 20 of them off of 4 Rosco power supplies in various locations connected to ETC network nodes connected to an ETC element console.
I have them patched to an instrument/DMX channel using the proper 'type' selection under 'patch' in the console. The ETC board came pre-loaded with types of accessories of which i chose 'Apollo fan color scrollers.' T
I have not been able to align or calibrate these guys properly so the gel threads are always sitting half on and half out of the frame. 'Calibrate' button on the board does not fix the issue.
Any ideas on a fix?
Chad
I have them patched to an instrument/DMX channel using the proper 'type' selection under 'patch' in the console. The ETC board came pre-loaded with types of accessories of which i chose 'Apollo fan color scrollers.' T
I have not been able to align or calibrate these guys properly so the gel threads are always sitting half on and half out of the frame. 'Calibrate' button on the board does not fix the issue.
Any ideas on a fix?
Chad