Hey ya'll;
I've got a CD80SV rack in our black box (circa 1995) that I need some help with.
We just purchased 25 LED wash lights. As a result I'd like to retrofit a few of our Dual 2.4kw dimmer cards to be non-dim constant voltage. I've taken a look and it seems simple enough to just bypass the SCR and choke and go direct from breaker to output pin; but I'm not sure if I need to modify or close any of the low voltage control circuitry. Has anyone got the answer or access to the schematic for the constant voltage power module as it applies to CD80SV Dimmer Module (part # 72314)
Thanks
I've got a CD80SV rack in our black box (circa 1995) that I need some help with.
We just purchased 25 LED wash lights. As a result I'd like to retrofit a few of our Dual 2.4kw dimmer cards to be non-dim constant voltage. I've taken a look and it seems simple enough to just bypass the SCR and choke and go direct from breaker to output pin; but I'm not sure if I need to modify or close any of the low voltage control circuitry. Has anyone got the answer or access to the schematic for the constant voltage power module as it applies to CD80SV Dimmer Module (part # 72314)
Thanks