triscuit256
Member
Has anyone used SanDevices E682 with an ETC Ion/Gio/Eos? The device accepts Streaming ACN v1.31, and ETC Net 3 is based on ACN.
I'm working on a design for a show and I'm looking at using a fairly large amount of digital LED strips. (To see the LED Strip, look here: LED Light Strip Demo - Dream Color - 5050 - RGB - 150LED - 6803 Chip - 94 Programs - YouTube)
The E682 is a LED pixel controller that outputs an digital signal that the LED strip can use to control each LED individually. There are DMX controlled alternatives for controlling the LED's but the E682 is a very clean solution that is also the most economical.
I'm working on a design for a show and I'm looking at using a fairly large amount of digital LED strips. (To see the LED Strip, look here: LED Light Strip Demo - Dream Color - 5050 - RGB - 150LED - 6803 Chip - 94 Programs - YouTube)
The E682 is a LED pixel controller that outputs an digital signal that the LED strip can use to control each LED individually. There are DMX controlled alternatives for controlling the LED's but the E682 is a very clean solution that is also the most economical.