ThemeParkPenguin
Member
What I would love you to help me out with is how to control my motors. I am using traxxas 2075 high torque waterproof servos to control each of the Swingers. I have found this control board to help me control the servo with DMX. Please look at the control board here: DMX512 to RC servo controller. What I need help with is how to use the board. The company does not reply to their emails often and the instructions are difficult for an inexperienced person like me to understand. Basically what I would love to know is, how can I supply power to the board( what cables should I use, how should I get the power, how should I rig up the cables to the board, do I need a transformer for the current etc) and how can I hook up a dmx cable/ xlr cable to the board and have it daisy chain to other fixtures. The company mentioned something about connectors for the DMX cables.What are those and how would I hook them up to the board?
If you know how to do this, have tips or suggestions or know any other more simple method, please tell me!
If you know how to do this, have tips or suggestions or know any other more simple method, please tell me!