EDI (WT4) WALK-THRU STATION all buttons flashing Lights at full, and no control

[BillBattell]

We have recently had a power surge in our system that has caused our remote panel on our auditorium stage to have all buttons flashing very fast and it sends all the lights to full intensity when the power is turned on. The main pannel seems to be functioning properly and will override this pannel, but, we want to have control on the stage again and need to know if replaceing the (WT4) WALK-THRU STATION will fix the problem. The system is using an MVP Dimmer Pannel and a Twilight 12 - 6ch Master Station, and the (WT4) Walk-Thru Station. Any advice would be appreciated.

 

[derekleffew]

Run, don't walk-thru, to Alan Child. He knows more than anyone about EDI products. Contact details can be found at Service and Repair Vendors - ControlBooth .
.

 

[BillBattell]

Run, don't walk-thru, to Alan Child. He knows more than anyone about EDI products. Contact details can be found at Service and Repair Vendors - ControlBooth .
.

I tried the link you provided but received an error message. Could you try sending me the link again?
Thanks,
Bill

 

[derekleffew]

Sorry, our wiki is going through some renovations.

Alan Child
EDI Service & Repair
Phone: 503-781-7361
[email protected]
.