Found some things in my
Manual that may be of some help.
Deleting a part from a multipart
cue
Deleting a part from a multipart
cue is the reverse of creating a multipart
cue from a standard
cue. When a part is deleted, the channels in the
deleted part do not leave the
cue but transfer to part 8, where they can be
reassigned if desired.
Channel levels are unaffected.
Follow these steps to delete part 1 from a multipart
cue in
Blind:
Keystrokes: Action:
1. Press [Blind]. Selects
Blind display mode
2. Press [Cue] [4]. Selects the
cue
3. Press [S7], More
Softkeys, until Part
appears as
softkey [S1].
Finds the Part
softkey
4. Press [S1], Part, [1]. Selects the part
5. Press [S6], Delete Part. Prompt reads:
To delete part, press ENTER –
Delete part &
tracking, press
TRACK
+ ENTER
To cancel, press
CLEAR
6. Press [Enter].a
a. If the part to be deleted has
tracking channels and you want
those
tracking channels removed from subsequent cues,
press [Track] before [Enter].
------------------------
Blind/
Cue > S7:
Enable/Disable
Tracking
------------------------
Other than those, whenever I've done something I didn't intend to do (more often than I'd care to admit) I've found that resetting the board (turning it off & on) sometimes eliminates the problem.