lozanoyaya
Member
Im new to programming DMX boards and have a few questions for a current art installation I'm working on.
I recently purchased a 4 CH Matrix DMX PRO + Chauvet 10 Universal DMX-512 Controller-OBEY 10.
I have two strands of 75 or more 60 watt incandescent bulbs to be programmed to separately go in and out of a slow fade on timed increments.
Do I make each strand go into a separate channel and then program them individually with the speed fader + fader time.
So sorry if this is rudimentary. I will included an example of what the environment will be close to.
I recently purchased a 4 CH Matrix DMX PRO + Chauvet 10 Universal DMX-512 Controller-OBEY 10.
I have two strands of 75 or more 60 watt incandescent bulbs to be programmed to separately go in and out of a slow fade on timed increments.
Do I make each strand go into a separate channel and then program them individually with the speed fader + fader time.
So sorry if this is rudimentary. I will included an example of what the environment will be close to.