Hello:
Controlling 32 channels through 4-8 channel dimmer packs via DMX. Added 4 LED fixtures to the last dimmer via Belden twisted pair to XLR. P1/ ground, P2/DMX -, P3/DMX +. DMX XLR cables used to daisy chain the 4 LED fixtures and terminator installed at end of chain on last fixture. Tested numerous times and all wiring seems OK.
Using Lightfactory 2.1 through USB Pro DMX. It all seems to operate fine - BUT...
At a random time within any of our light queues one or 2 of the 4 LED fixtures will go off and then on without any apparent reason. The dimmer pack controlled "conventional" fixtures are rock solid.
1-32 are patched to the dimmer pack fixtures. 33-43 patched to 1 LED moving head, 44-54 patched to a 2nd LED moving head and 55-59 are patched for the last 2 strip light LED's (both set to channel 55 controlled identically).
It makes no sense. It must be something simple but I am pretty new to this.
Thanks in advance for any suggestions!
Controlling 32 channels through 4-8 channel dimmer packs via DMX. Added 4 LED fixtures to the last dimmer via Belden twisted pair to XLR. P1/ ground, P2/DMX -, P3/DMX +. DMX XLR cables used to daisy chain the 4 LED fixtures and terminator installed at end of chain on last fixture. Tested numerous times and all wiring seems OK.
Using Lightfactory 2.1 through USB Pro DMX. It all seems to operate fine - BUT...
At a random time within any of our light queues one or 2 of the 4 LED fixtures will go off and then on without any apparent reason. The dimmer pack controlled "conventional" fixtures are rock solid.
1-32 are patched to the dimmer pack fixtures. 33-43 patched to 1 LED moving head, 44-54 patched to a 2nd LED moving head and 55-59 are patched for the last 2 strip light LED's (both set to channel 55 controlled identically).
It makes no sense. It must be something simple but I am pretty new to this.
Thanks in advance for any suggestions!