Here's my situation, I have a Leviton D4DMX dimmer pack. It seems to work fine on Leviton controllers, but when used with ETC consoles, channels will randomly jump to full or off for a split second. There seems to be no rhyme or reason behind when the flickering will occur or on what channel. I have tested it with a MicroVision FX, an Insight 2 (on both universes) and on a Zero88 FatFrog. I tried adjusting the DMX output speed on the Insight 2 from max to slow, and it did not seem to have an effect on the flickering at all. The MicroVision, Insight and FatFrog are all known to work properly.
I'm not using audio cable for data, I'm using the DMX input on the pack rather than the MicroPlex input, and the DMX line is terminated. I have tried it both by its self and at the end of a daisy-chain of 4 Selador Vivid-Rs. Same issue every time, regardless of how I configure it.
Any help or suggestions are appreciated.
I'm not using audio cable for data, I'm using the DMX input on the pack rather than the MicroPlex input, and the DMX line is terminated. I have tried it both by its self and at the end of a daisy-chain of 4 Selador Vivid-Rs. Same issue every time, regardless of how I configure it.
Any help or suggestions are appreciated.