twalker1998
Member
For about a week now, I have had lights set for a show that is to open in four days. Everything has been working fine, until today- I decided to add in four LED lights and a hazer on the second DMX universe. The LEDs and hazer work just fine, but as soon as I first turned the LEDs on, a fresnel and ellipsoidal that are hung over stage also turned on and I can't get them to turn off. These lights are controlled by the dimmer rack, which is on the first DMX universe, so I'm not sure why this is happening. They just sit there and slowly fade back and forth from a very high intensity to a lower intensity. I've checked the patch and nothing seems to be overlapping. There are no cues or macros running and there is nothing parked. The only way I can get them to turn off is by cutting the power to the dimmer rack completely, and obviously this isn't a permanent fix. Does anybody know why this would be happening and what I could do to fix this?
Using an ETC Express 250 with an ETC SR48 dimmer rack.
Using an ETC Express 250 with an ETC SR48 dimmer rack.