MAC 250+ & ETC Element: gobo problems

[robofish114]

i just got the etc element and it has an awesome interface for my martin mac 250+. i can just click my gobo and gel and it shuffles through till it finds 1 that closely relates. the gobo buttons even have the pattern on them so i can easily tell what gobo i want. but when i select a gobo it gets the wrong 1. can i reprogram the board so the symbols match the gobo or do i have to go up there and swap the gobos into the right spot? need help fast!

 

[Studio]

re: MAC 250+ & ETC Element: gobo problems

Take a look at page 36-37 of the manual.

http://www.etcconnect.com/docs/docs_downloads/manuals/Element_v1.6_User_Manual_RevA.pdf

Step 10:
If your moving light includes parameters such as a color scroller or gobo wheel and you have custom gels or non-standard patterns installed, use the Scroller/Wheel Picker and the Editor to modify the device patched. The more specific your patch data (including accurate colors and patterns) the more detailed programming and operating will be.