One Projector, Two Macs

[JVV]

So my Show Control MAC has died and I have a dance company coming in with all their projections. Typically they run those off their MAC which is connected to the projector via HDMI. We use the house Show Control Computer to run a Qlab file over the wireless network to Mute and Unmute the Projector when the curtain comes down. (By Mute I mean shutter the image, not sure if Mute is the technical term or just what the kid who programmed the Qlab file decided to call it).

Anyway, he has long since graduated and I need to take this file and run it off a new computer, however I am uncertain where to enter the IP address of the Projector so the new computer will control it.

Hopefully I am asking the right question...
Thanks,
JVV

 

[JVV]

Hey all, I figured out how to alter the script to add the IP address.
Turns out this was an old file with the old projector IP address.

Everything is updated and working perfectly.

JVV

 

[ruinexplorer]

Always good to know when a resolution is found.