Since i am successful in building my own Co2 jet but i am stucked with a problem regarding DMXDriver.
Unable to get the DMXDriver to used to operate it via DMX .
Any suggestions please .
Thank You
Since i am successful in building my own Co2 jet but i am stuck with a problem regarding DMXDriver.
Unable to get the DMXDriver to used to operate it via DMX .
Any suggestions please .
Thank You
What do you need DMX to do for you?
Sample questions: Open a solenoid valve which controls Co2?
If so, do you already have this valve?
If so, is the solenoid operated by an AC or DC coil and, if so, at what voltage?
Do you need DMX to do anything proportional, or is this simply an On - Off / Go - No Go application?
Help us to help you.
Toodleoo!
Ron Hebbard.
What, if any, other parts are there to the control arrangement for this?
Is the plan to go from power to DMXdriver to solenoid direct or is there a bigger system?
Ok, I'll be the spoil-sport. DMX is kind of lousy to run special effect of any kind on. It often pukes out a random value, which is invisible when you are dealing with lights, but may trip a mechanical device such as a solenoid.
Sometimes, the direct wired primitive switch works best
What is readily available in the US is not necessarily going to be so readily available in India, and if it is, we might have voltage issues...
I was leading towards what JD has mentioned. DMX can be a part of this, but only with other safety checks and balances, interlocks, arming switches, etc.
There are generally better ways to solve the problem though...