Cburg
Member
That is the motto of my Student Tech team. I have been in this field for more years than I want to admit and I just found you. This old Dog learned something New today ...
The reason I am here is to try to find information about our Movers.
Legend 5000x. We have 2. only one is working. While these are old units I know for a fact that they have less than 100 hours on them. The problem is that the DMX signal does not appear to be getting to the unit. By that I mean that the DMX led does not come on and the mover does not respond. I can plug the DMX line into the other unit and it works fine so the problem is in the broken unit.
Of course Chauvet was they usually non-helpful selves saying the unit was discontinued. I have the User manual but I would love to fine either the service manual and/or schematic.
I read here that this unit is the same as an Obey 5, so I will begin to look there also.
Does anyone here have a service manual or Schematic for these Units? Or any idea what I can try? I see a 8pin dip chip in a mounting socket on the PCB near the display board. I am thinking it is in a socket for a reason as it may be a buffer or Opto or other protection device. That is why I was look for the schematic.
Well Thanks for reading this far, Thanks for any help (or Light) you can shed on this problem
Thanks For being here!
The reason I am here is to try to find information about our Movers.
Legend 5000x. We have 2. only one is working. While these are old units I know for a fact that they have less than 100 hours on them. The problem is that the DMX signal does not appear to be getting to the unit. By that I mean that the DMX led does not come on and the mover does not respond. I can plug the DMX line into the other unit and it works fine so the problem is in the broken unit.
Of course Chauvet was they usually non-helpful selves saying the unit was discontinued. I have the User manual but I would love to fine either the service manual and/or schematic.
I read here that this unit is the same as an Obey 5, so I will begin to look there also.
Does anyone here have a service manual or Schematic for these Units? Or any idea what I can try? I see a 8pin dip chip in a mounting socket on the PCB near the display board. I am thinking it is in a socket for a reason as it may be a buffer or Opto or other protection device. That is why I was look for the schematic.
Well Thanks for reading this far, Thanks for any help (or Light) you can shed on this problem
Thanks For being here!