Ok the pictures show VL2c's , VL4's with tophats, and a Mini-Artisan
console.
The
console pre-dates the upgrade to Mini-Artisan plus(1995) which means it can only output S-200 native to the VL's,
DMX for dimming for the VL-5's, and
DMX for dimming only channels. It cannot patch other moving lights.
The VL5s and 6s should be able to be controlled by another
DMX console, however the VL2s and 4s do not have the extra bits required to allow them to run off
DMX. Don't know if those bits are still available through
PRG.
There are no VL1s or VL3s pictured. In fact I believe only 1 VL3 survived from being converted to a VL2b, because
Vari-Lite kept that one around for patent reasons
They do not use the Marc350 lamps. The VL2c uses an HTI600, VL4 uses HTI400, VL6 uses MSR400 or MSR600 depending on if it is a 6, 6b, or 6c, and the VL5 uses a 1200watt
incandescent.
Only having one six pack chassis listed means they can only run 6xVL6's tops, and may have even less.
If there is no ACS or Mini-ACS rack, S-200 Trunk cable, and S-200 repeaters, then there is no way to operate the VL2s and VL4s. The ad list "3 out breakers" so that may be the required kit... it is hard to tell.
Hope this helps.
Ronald Beal
Vari-Lite Technician 1994-2002