I have one or two in resale drawer. (off line PM) Still pining for my Splitter v.1 which someone decided they needed than me that bought it. On the Splitter II... I normally take a 1/4" pecial stock steel in a drill in both directions for a while, so as to reduce the abrasiveness of the brushes. Better concepts could be done. Amongst them, given it's designed in concept for both 60A and 20A for splitting... it should be more what is neededed for 20A. Thinner blade, better brush design and the 20A maximum with slot. 60A should get it's own tool, or not. As with 20A stage pin and 5Kw stage pin... both are more and more obsolete at this point. Sure still in use but less so.