Dane Boulton
Member
Hey Guys,
Im sure questions like this have been asked before but I couldn't find anything to help me.
Ive got my chamsys Magic Q dongle and have had a bunch of LED Cans donated to my show.
The light out of them is great so I really want to use them but they are a chinese product with not much support and offer only one DMX Mode.
Ch 1 Red
Ch 2 Green
Ch 3 Blue
Ch 4 000 - 160 = Dimmer // 161 - 255 Strobe
Now I built a fixture profile for them and it worked but i'm wondering if there is any possible way to separate the strobe and dimmer channels. Using Ranges or Virtual Channels or something similar. I set up a range but I didn't really understand how to use it. As for busking I would love to have these parameters on separate channels so I dont have to try and make sure a fader doesn't go above a value of 161
Cheers
Im sure questions like this have been asked before but I couldn't find anything to help me.
Ive got my chamsys Magic Q dongle and have had a bunch of LED Cans donated to my show.
The light out of them is great so I really want to use them but they are a chinese product with not much support and offer only one DMX Mode.
Ch 1 Red
Ch 2 Green
Ch 3 Blue
Ch 4 000 - 160 = Dimmer // 161 - 255 Strobe
Now I built a fixture profile for them and it worked but i'm wondering if there is any possible way to separate the strobe and dimmer channels. Using Ranges or Virtual Channels or something similar. I set up a range but I didn't really understand how to use it. As for busking I would love to have these parameters on separate channels so I dont have to try and make sure a fader doesn't go above a value of 161
Cheers