BillConnerFASTC
Well-Known Member
Long understood the requirement for no common neutrals for SCR dimmed circuits, but wondering with constant circuits, switched centrally or locally (ColorSource relays), if it matters. Would for instance three hots, a neutral, and a ground be fine for LEDs, like 10 ColorSource units on each of three circuits? 30 units on a pipe might be adequate (like the old b-way standard of 28 or 29 units on a 42' electric). I'd actually prefer 4 circuits and am considering two drops of two circuits each, each with 2 hots, a neutral, and a ground.
Then I wonder if a traditional 6 circuit multi - I believe usually 6 hots, 6 neutrals, and two grounds, would actually support 12 constant circuits. That would seem plenty on a Prodigy for instance - one flat cable.
Just curious what others are providing and finding with all LED rigs.
Then I wonder if a traditional 6 circuit multi - I believe usually 6 hots, 6 neutrals, and two grounds, would actually support 12 constant circuits. That would seem plenty on a Prodigy for instance - one flat cable.
Just curious what others are providing and finding with all LED rigs.