I own R2 washes, R2 spots, RH1 hybrids, and ovation 160ww fixtures. I have always run them on 110v but planning to begin powering them on 208v 3ph or occasional 220v single phase. I understand the power supplies are auto self switching. However do I need to install a different fuse in the fixtures since they will be running higher voltage and less amps? When converting the powercons to 208/220v I just need to convert the neutral wire to a hot wire on a separate phase/leg? Any other thing to take note when operating these on 208 3phase or 220v single phase? Down side to 220 single over 208 3?
What happens if the voltage is lower on one leg while using 3 phase?
What happens if the voltage is lower on one leg while using 3 phase?