blindbuttkicker
Member
Laptop, NSI Light Board, and 32 channel Behringer Audio Desk, along with a TEAC CD/Tape Combo as well as Alesis Masterlink ML-9600 Recrder for CD's
The light board usually sits in the Old Sound Booth off the church because of its 15V power supply missing, so we have it hooked into a DMX 15V system, otherwise when ran from the deck (basicclly plugging the DMX control cable into a snake head in the old sound room, running about 200 to 250 feet of underground cabling to the deck on 3XLR Female and plugging it into the back of the Male XLR Port on the board, and thats when the board loses it's 15V Control Circut and the lights when powered down, still have a soft glow, almost like a preheat glow, due to the dimmer packs (also NSI, 8 channel) not recieving the correct singals and voltage to power full off. and the NSI Dimmers have a mind of their own sometimes, when the board is given new programming in a memory scene and the board is returned to normal mode, it likes to power cycle the dimmers and "dance" the lights. lol we call this "the board just being confused" cause when the Dimmers lose contact with the light board if its unplugged (or for some unknown reason the light board should lose power and not the dimmers) the Dimmers power the front house spots and stage to a "Panic Mode" setting, kind of conveinent when working in the dark on troubleshooting or if theire is a power surge, which drives the dimmers to go into "Crazy mode" meaning all on/of/flickering/steady (yea thats when we have to power full down and reset the system) more pics will follow, my station for VBS (Vacation Bible School) currently is Audio and Lighting (Sorry for bad quality wasnt like that when i took em, ill take better ones tomorrow and re upload)
Attachments
Last edited: