KT the TD
Member
I have my VariLite1000's set to turn on with the lighting board (ETC ION) lately every time the start up the do a loud configue, (horrifying sounding clicking when they move) and point as far up as they will go which is not how they are set to. I also have no control over pan/tilt or the lamp. Anything else I'd need the lamp on to test. I tried eveything I can think of on the item itself as well as unpluged and re-connected every cable and made sure everything on the ION was still the same. I cannot for the life of me figure it out. I also get no error codes when I check the system.
Side note I called VariLite and got no answer. Thought I'd try here before calling again.
Advice?
Side note I called VariLite and got no answer. Thought I'd try here before calling again.
Advice?