Hello all. I just started a residency at a bar and now I have been tasked to hang lights. The drop ceiling are about 10 feet but the roof goes to about 13 feet so the owner doesn't want to use the truss but wants to just use a 2 inch pipe and hang it from the pipe. So I'm looking for the hardware needed to do it. I would image that beam clamps, threaded rods and 2 inch metal pipe but am not sure so I ask the experts. It will span about 20 feet horizontally and have about 10-12 moving heads. I would light for it to support about 1500lbs. I have seen this method used in many clubs but don't know how it was done.