I'm trying to address and program with two Intimidators for an upcoming show. My first issue is I'm not sure if I'm addressing the fixtures correctly. I have a 1 to 1 patch currently. I'm starting at channel 547. I select the manufacturer (Chauvet) then the fixture type is part of the issue. They have multiple versions of the Intimidator. I'm guessing since mine says nothing but "Intimidator" on the fixture it must be the 1.0 version???? I have included pictures of the fixture and label. So I need the addressing to start at 35, so I select dip switch 1,2 and 6 (1+2+32=35). However the fixture does not like that. The lamp turns on and shuts off after a short amount of time. I have control over the pan and tilt of the mirror but that's it. No color or gobo contol. I found out that when unplugging the data the lamp stays on. I also found that with the data plugged in, if I shut the #1 dip switch off I can cycle through gobos and colors, pan and tilt. However the gobos aren't matching up with what is in the ETC ion. They are the correct designs but when the "square" gobo is selected on the board the fixture pulls up dots. Or when you select the red color it pulls up green. Which makes me think my addressing is wrong. Can anyone help me?
I have also attached the manual.
I have also attached the manual.