Hi,
I have been searching the web for a schematic for the ENR control module without any luck.
I have 3 of the 12 channel racks. 2 of them will now not turn on due to air flow errors. They are giving airflow errors because they are not spinning the fan. However the problem is with the control module because when I swap for the know good one, the fan spins and the dimmer works fine.
I can't bring the whole dimmer to my shop and I am having trouble identifying the fan driver circuit on the control module pc. I was expecting something like a to220 device that turns the fan on, but there isn't. Perhaps it is just logic level control from the control module.
A schematic would sure help me figure this out. I have to make these dimmers last for just the rest of the year.
Thanks,
Mike
I have been searching the web for a schematic for the ENR control module without any luck.
I have 3 of the 12 channel racks. 2 of them will now not turn on due to air flow errors. They are giving airflow errors because they are not spinning the fan. However the problem is with the control module because when I swap for the know good one, the fan spins and the dimmer works fine.
I can't bring the whole dimmer to my shop and I am having trouble identifying the fan driver circuit on the control module pc. I was expecting something like a to220 device that turns the fan on, but there isn't. Perhaps it is just logic level control from the control module.
A schematic would sure help me figure this out. I have to make these dimmers last for just the rest of the year.
Thanks,
Mike