Re: Pulling 240v from two 120v circuits
If you are going to run 240/208 at least use a rated connector. Most movers can run on 120 check with the shop and see if they can be ran on 120 and they will typically swap the connectors and voltage for you. I was always happy to do this as a free service to prevent and strange wiring just like I would loan out non dim modules. I wanted to protect my equipment and help prevent any liabilities. If you have 120 and need 240 the best way is by using a transformer. They are the most safest and easiest way of fixing this problem besides changing the voltage taps on the fixture if 240 is not avaliable.
If you are going to run 240/208 at least use a rated connector. Most movers can run on 120 check with the shop and see if they can be ran on 120 and they will typically swap the connectors and voltage for you. I was always happy to do this as a free service to prevent and strange wiring just like I would loan out non dim modules. I wanted to protect my equipment and help prevent any liabilities. If you have 120 and need 240 the best way is by using a transformer. They are the most safest and easiest way of fixing this problem besides changing the voltage taps on the fixture if 240 is not avaliable.