I had someone trying to to work with the newer Chauvet colorstrip lights the other day using a NSI 7532 board. The color strips have a rgb mode with individual color control IF a reasonably tight spec DMX value is given on Channel 1.
TWO QUESTIONS:
I looked thru the manual on the NSI quickly and could not find an easy way to have the slider DMX value displayed on the lcd panel.
Other question, has anyone had problems getting the Colorstrips under dmx into rgb mode? all the other modes seem to work, but you are supposed to be able to set channel 1 and then use channel 2 3 4 to control the levels of reg green blue. No value in channel 1 seemed to put it into this mode.
Sharyn
TWO QUESTIONS:
I looked thru the manual on the NSI quickly and could not find an easy way to have the slider DMX value displayed on the lcd panel.
Other question, has anyone had problems getting the Colorstrips under dmx into rgb mode? all the other modes seem to work, but you are supposed to be able to set channel 1 and then use channel 2 3 4 to control the levels of reg green blue. No value in channel 1 seemed to put it into this mode.
Sharyn