hoosierman
Member
Anyone using Chauvet Maverick MK3's with an ION? Was wondering if you find it odd that the intensity doesn't come up with the typical addressing steps? As with all of our other LEDs, I can call up the fixtures control channel and give it an intensity and there it is. The MK3 shows a value on the background intensity, when giving it an intensity value, but there's no output from the fixture until the encoder is dialed up. Doesn't seem as though the personality for this fixture is quite right.
Meant to clarify one thing... when dialing up the intensity value on the ION's encoder, it is only the master intensity encoder that results in output from the fixture.
Meant to clarify one thing... when dialing up the intensity value on the ION's encoder, it is only the master intensity encoder that results in output from the fixture.