I am trying to create a
effect that will scroll through colors on a generic
RGB LED fixture.
Console is an
ETC expression 3. Whats the easiest way to do this? Thank You
Some leds like elation pars have a "color" function. You can set a step
effect, each step is a new color.
If not, then use the step
effect to blend colors. Step 1 chanel red time 2, up 1, dwell 1, down 1. Step 2 blue and step 3 green. Adjust times as desired.
Another way is to use multiple fixtures in each step. For example with 3 fixtures, step 1 fix 1 red, fix 2 blue, fix 3 green. Step 2 fix 1 blue, fix 2 green, fix 3 red. Step 3 fix 1 green, fix 2 red, fix 3 blue. Adjust times as desired. You can put the effects on a sub. Either bump or slider to run
effect.
One more way is to use a subrutine. Record
cue 1 through 4 Each
cue with any fixtures and blend as you like. Go to
blind, create a sub #, type = subroutine. Add each
cue as a new step. Set it to repeat.
Table 22:
Blind/Subroutine
Subroutine Subr 2
1 Step Step
2
Cue List:
Cue List Select
Cue
3 Spread Sheet:
Cue SS Rate
4 Previous
Page Type/
Level
5 Next
Page Insert Step
6 Delete
Cue Delete Step
7 More Softkeys: Subr 2 More Softkeys: Subr
8 Style Up/Down/Follow
Subroutine Subr 2
1 Step Step
2
Cue List:
Cue List Select
Cue
3 Spread Sheet:
Cue SS Rate
4 Previous
Page Type/
Level
5 Next
Page Insert Step
6 Delete
Cue Delete Step
7 More Softkeys: Subr 2 More Softkeys: Subr
8 Style Up/Down/Follow