S sellout4 Member Apr 29, 2017 #1 Anybody know what kind of connector this is? This is from the PCB of a TR4 ColorKinetic Striplight. Thanks!
Anybody know what kind of connector this is? This is from the PCB of a TR4 ColorKinetic Striplight. Thanks!
Amiers Renting to Corporate One Fixture at a Time. Apr 30, 2017 #2 Fish in a barrel. Send a picture to mouser or digikey. Or call Phillips and ask them for some.
Chris15 CBMod CB Mods Premium Member Departed Member Apr 30, 2017 #3 It's likely to be a connector similar to this range: https://www.digikey.com/catalog/en/partgroup/kk-series/25872 You'd need to check the pitch (spacing between pins), there are several similar sizes that naturally go close but don't mate properly...
It's likely to be a connector similar to this range: https://www.digikey.com/catalog/en/partgroup/kk-series/25872 You'd need to check the pitch (spacing between pins), there are several similar sizes that naturally go close but don't mate properly...
TNasty Active Member May 2, 2017 #4 Looks like a typical 3-pin "PC Fan" connector, but with a latch. You'll probably find a bunch of them on Mouser or Jameco (more likely without the latch, but it would still work).
Looks like a typical 3-pin "PC Fan" connector, but with a latch. You'll probably find a bunch of them on Mouser or Jameco (more likely without the latch, but it would still work).