Converting a Manual Dowser To DMX

[nickstar514]

I purchased this manual projector dowser about a year ago. The dowser itself is controlled by the remote which up until about now has pretty much worked out.

Is there anyway I would be able to convert this to run on DMX?

Here is the link to the dowser I currently have...http://www.response-box.com/mini.shtml


Thanks,

-Nick

 

[n1ist]

Looks like a DMX-controlled relay should be able to drive that. Not sure if you need 2 form A or a single form C contact to drive it but a few minutes with your remote and a beeper or continuity tester (or a screwdriver would tell you the circuit needed.
/mike