rickytowner
Member
Hey, Everyone
This is my first real post hear and i could really do with some help on this one...
Well hear goes...
Bit about my self first, I'm 15 and about to start College on a Preforming Arts: Technical Course and also in my spare time Me and a few mates have set up a Youth Theater Company along side Birmingham City Council. (www.fmtproductions.co.cc)
So hears my question, and i'm really desperate for an answer to this...
For Christmas i was given 4 LED Par 64 RGB DMX light cans, the control output on them is 3-Pin XLR/DMX... We have used them in one of our shows and they hooked up to the dimmers via the DMX input and i could control them fine, but now we want to use them for a small show on there own just for a stage wash. So i was looking around for a small and cheap controller, and i found this; http://www.thomann.de/gb/stairville_ddc6_dmx_controller.htm.
What i was thinking is if i connected all 4 of them together via the 3-Pin DMX Out's and then one of them to this small dimmer, then i addressed them correctly, would i be able to use them the same as we did in the theater: (Slider 1= R, Slider 2= G, Slider 3= B, Slider 4= LED Grand Master)... Could any of you help me out with this question please?
Thankyou for any help in advance and i look forward to any advice and help
Please get back to me, i really am stuck hear :neutral:...
Thankyou
Ricky
This is my first real post hear and i could really do with some help on this one...
Well hear goes...
Bit about my self first, I'm 15 and about to start College on a Preforming Arts: Technical Course and also in my spare time Me and a few mates have set up a Youth Theater Company along side Birmingham City Council. (www.fmtproductions.co.cc)
So hears my question, and i'm really desperate for an answer to this...
For Christmas i was given 4 LED Par 64 RGB DMX light cans, the control output on them is 3-Pin XLR/DMX... We have used them in one of our shows and they hooked up to the dimmers via the DMX input and i could control them fine, but now we want to use them for a small show on there own just for a stage wash. So i was looking around for a small and cheap controller, and i found this; http://www.thomann.de/gb/stairville_ddc6_dmx_controller.htm.
What i was thinking is if i connected all 4 of them together via the 3-Pin DMX Out's and then one of them to this small dimmer, then i addressed them correctly, would i be able to use them the same as we did in the theater: (Slider 1= R, Slider 2= G, Slider 3= B, Slider 4= LED Grand Master)... Could any of you help me out with this question please?
Thankyou for any help in advance and i look forward to any advice and help
Please get back to me, i really am stuck hear :neutral:...
Thankyou
Ricky
Last edited by a moderator: