variable
Member
For the second day Ive come in to work and found that some lights were flickering. Both times The lights had been activated by the SmartLink wall station. Yesterday The problem disappeared on its own before I found out what caused it. Today I discovered that a dimmer in the middle of the rack read "emergency active."
I powered down the dimmer and restarted it and the problem cleared up, but i have no idea what caused it to go into that mode nor why it was causing random lights on several different Smartpack units (but the same dmx chain) to either flicker or turn on and off.
I have a show in 4 hours and ETC is already closed. I was hoping someone might have some feedback to help me figure out why the dimmer went into this mode and how I can prevent it in the future.
I powered down the dimmer and restarted it and the problem cleared up, but i have no idea what caused it to go into that mode nor why it was causing random lights on several different Smartpack units (but the same dmx chain) to either flicker or turn on and off.
I have a show in 4 hours and ETC is already closed. I was hoping someone might have some feedback to help me figure out why the dimmer went into this mode and how I can prevent it in the future.