The
system is comprised of two Epak 2500's
# Four-Way modular, 2500-Watt Control and Amplification
System for use specifically with ES 1.0 Mid / High and
Bass active-driven Modules
# High Frequency, 100-watt, Class AB – push pull – low intermodulation design
# Mid Frequency, 200-watt, Class AB – push pull – low intermodulation design
# Mid
Bass, 600-watt, high-efficiency, current-enhancing
switch mode technology with Linear Active Filter
#
Bass, 1600-watt, high-efficiency, current-enhancing
switch mode technology with Linear Active Filter
# Complete, on-board
speaker system management including equalization, time correction,
crossover filters,
amplifier overdrive protection,
system set-up and output
level controls
# AC soft start circuitry with ON/OFF AC
breaker switch provides thorough
power protection
#
Passive heat dissipation design with demand-sensitive forced cooling back-up
system
# Setup provides selection and control of six different
bass module setups
Individual
system and
bass module output
level controls
# Unique ability to select between two types of
bass “character”–ATTACK and EXTENSION
# Professional enclosure using exterior-grade Baltic birch construction with wear resistant polymer coating
# Proprietary corner handle design for simplified handling and carrying
Acetal copolymer high impact, low friction feet for easy cabinet movement
# Removable front
cover holds all AC and
speaker cables
Included: One 13ft (4m) long
speaker cable with AP4 connectors included for main
bass module hook up (4-conductor, 13
gauge [2.5mm2]
wire,)
# Included: One 20ft (6m) long
speaker cable with AP6 connectors included for mid / high module hook up (6
conductor, 13
gauge [2.5mm2]
wire)
# Included: Two 5ft (1.5m) long
speaker cables with AP4 connectors included for
bass module daisy chaining (4
conductor, 13
gauge [2.5mm2]
wire)
# Included: One 20ft (6m) long AC3
conductor cable
with market/model dependant connectors.
Two EX 1.0
* High-output, compact, lightweight Mid/High Module.
* 131 dB sustained output.
* Wide dispersion, rotatable, integrated Mid/High
horn design provides optimized
transducer loading and controlled dispersion.
* New Patent-Pending 1.75” (44mm)
diaphragm titanium
compression driver with complex geometry
phase plug for higher output and lower
distortion performance and neodymium.
* Six-inch midrange
driver with 1.75” (44mm) neodymium magnetic motor structure for increased control and output and decreased
distortion and weight.
* Proprietary midrange heat dissipation
system controls
voice coil temperature, ensures high dynamics and extends
transducer lifespan.
* Horn-loaded, twelve-inch mid-bass
driver with 3.00” (76mm)
voice coil assembly and neodymium magnetic motor structure.
* Professional, exterior-grade Baltic birch construction with wear-resistant polymer coating.
* Proprietary corner and side handle designs for simplified handling and carrying.
* Acetal copolymer high impact, low friction feet are asymmetrically located on three sides allowing vertical or horizontal
system set up, lock-in and easy cabinet movement.
* Four internal corner braces tied to eight M10 suspension points. A total of 24 suspension points are available for custom installation applications.
And two ES 2.5
# High-output, double 15-inch,
Bass Module
# 134 dB of output (per
unit)
# High acoustic loading via twin asymmetrical chambers
# Two fifteen-inch low frequency drivers with 4.00” (100mm) polymide, high temperature
voice coil assembly and carbon fiber reinforced
cone assemblies
# Professional, exterior grade Baltic birch construction with highly resistant polymer coating
# Proprietary corner handle design for simplified handling and carrying
# Acetal copolymer high impact, low friction feet are asymmetrically located on two sides allowing vertical or horizontal
system set up, lock-in and easy cabinet movement
# Six internal corner braces with twelve M10 suspension points.